Article Text

other Versions

PDF
Original research
Aneurysm pressure measurement before and after placement of a Pipeline stent: feasibility study using a 0.014 inch pressure wire for coronary intervention
  1. Satoshi Tateshima,
  2. Jesse G Jones,
  3. Fernando Mayor Basto,
  4. Fernando Vinuela,
  5. Gary R Duckwiler
  1. Division of Interventional Neuroradiology, Department of Radiological Sciences, Ronald Reagan UCLA Medical Center and David Geffen School of Medicine at University of California, Los Angeles, California, USA
  1. Correspondence to Dr Satoshi Tateshima, Division of Interventional Neuroradiology, Department of Radiological Sciences, Ronald Reagan UCLA Medical Center and David Geffen School of Medicine at UCLA, 757 Westwood Plaza, Suite 2129, Los Angeles, CA 90095-7437, USA; stateshima{at}mednet.ucla.edu

Abstract

Flow-diverting stents have provided a new endovascular capacity to reconstruct an intracranial aneurysm with its diseased parent artery. The results of first-generation flow diversion stents have been encouraging, with even large or giant treated aneurysms achieving complete angiographic occlusion at 12-month follow-up. Numerous clinical reports have described a slow progressive thrombosis pattern and gradual increase in rate of complete aneurysm obliteration over time. Despite promising early results, some complications specific to flow-diverting stents have been encountered. Chief among them is delayed aneurysm rupture. This complication did not emerge with stent-assisted coil embolization of intracranial aneurysms, and the underlying cause has not been established. However, new evidence suggests that persistent, or even increased, aneurysm pressure after stent placement may play a role in some delayed ruptures. We sought to evaluate this phenomenon by measuring intrasaccular pressure before and after stent placement using two different 0.014 inch coronary pressure measurement wires. Two patients with giant internal carotid artery aneurysms treated with flow-diverting stents were evaluated. Before and after stent deployment, intrasaccular aneurysm and systemic arterial pressures were recorded for 60 s and compared. In both cases, intrasaccular pressure measurement with the use of 0.014 inch pressure wire system was feasible; the pressure wires could be pushed out of the microcatheter placed in the aneurysms without friction or unexpected microcatheter motion. Despite successful flow-diverting stent deployment and angiographic flow diversion effects with excellent wall opposition across the aneurysm necks, there was no significant difference between intrasaccular and systemic pressures.

  • Aneurysm
  • Angiography
  • Blood Flow
  • Blood Pressure
  • Flow Diverter

Statistics from Altmetric.com

Request permissions

If you wish to reuse any or all of this article please use the link below which will take you to the Copyright Clearance Center’s RightsLink service. You will be able to get a quick price and instant permission to reuse the content in many different ways.