RT Journal Article
SR Electronic
T1 Association between hemodynamic conditions and occlusion times after flow diversion in cerebral aneurysms
JF Journal of NeuroInterventional Surgery
JO J NeuroIntervent Surg
FD BMJ Publishing Group Ltd.
SP 286
OP 290
DO 10.1136/neurintsurg-2013-011080
VO 7
IS 4
A1 Fernando Mut
A1 Marcelo Raschi
A1 Esteban Scrivano
A1 Carlos Bleise
A1 Jorge Chudyk
A1 Rosana Ceratto
A1 Pedro Lylyk
A1 Juan R Cebral
YR 2015
UL http://jnis.bmj.com/content/7/4/286.abstract
AB Background Evaluation of flow diversion treatment of intracranial aneurysms is difficult owing to lack of knowledge of the target hemodynamic environment. Objective To identify hemodynamic conditions created after flow diversion that induce fast aneurysm occlusion. Methods Two groups of aneurysms treated with flow diverters alone were selected: (a) aneurysms completely occluded at 3 months (fast occlusion), and (b) aneurysms patent or incompletely occluded at 6 months (slow occlusion). A total of 23 aneurysms were included in the study. Patient-specific computational fluid dynamics models were constructed and used to characterize the hemodynamic environment immediately before and after treatment. Average post-treatment hemodynamic conditions between the fast and slow occlusion groups were statistically compared. Results Aneurysms in the fast occlusion group had significantly lower post-treatment mean velocity (fast=1.13cm/s, slow=3.11cm/s, p=0.02), inflow rate (fast=0.47mL/s, slow=1.89mL/s, p=0.004) and shear rate (fast=20.52 1/s, slow=32.37 1/s, p=0.02) than aneurysms in the slow occlusion group. Receiver operating characteristics analysis showed that mean post-treatment velocity, inflow rate, and shear rate below a certain threshold could discriminate between aneurysms of the fast and slow occlusion groups with good accuracy (84%, 77%, and 76%, respectively). Conclusions The occlusion time of cerebral aneurysms treated with flow diverters can be predicted by the hemodynamic conditions created immediately after device implantation. Specifically, low post-implantation flow velocity, inflow rate, and shear rate are associated with fast occlusion times.