TY - JOUR T1 - Development and evaluation of a craniocerebral model with tactile-realistic feature and intracranial pressure for neurosurgical training JF - Journal of NeuroInterventional Surgery JO - J NeuroIntervent Surg SP - 94 LP - 97 DO - 10.1136/neurintsurg-2019-015008 VL - 12 IS - 1 AU - Zongchao Yi AU - Bingwei He AU - Yuqing Liu AU - Shenyue Huang AU - Wenyao Hong Y1 - 2020/01/01 UR - http://jnis.bmj.com/content/12/1/94.abstract N2 - Objective In this article, a craniocerebral model is introduced for neurosurgical training, which is patient-specific, tactile-realistic, and with adjustable intracranial pressure.Methods The patient-specific feature is achieved by modeling from CT scans and magnetic resonance images (MRI). The brain tissue model is built by the hydrogel casting technique, while scalp, skull, vasculature, and lateral ventricles are all-in-one fabricated by three-dimensional (3D) printing. A closed-loop system is integrated to monitor and control the intracranial pressure. 3D measurements, mechanical tests, and simulated external ventricular drain (EVD) placement procedures are conducted on the model.Results A neurosurgical training model is completed with high accuracy (mean deviation 0.36 mm). The hydrogel brain tissue has a stiffness more similar to that of a real brain than the common 3D printed materials. The elasticity modulus of hydrogel brain tissue model is E=25.71 kPa, compared with our softest 3D printed material with E=1.14×103 kPa. Ten experienced surgeons rate the tactile realness of the neurosurgical training model at an average point of 4.25 on a scale from 1 (strongly negative) to 5 (strongly positive). The neurosurgical training model is also rated to be realistic in size (4.82), anatomy (4.70), and effective as an aid to improve blind EVD placement skills (4.65).Conclusions The neurosurgical training model can provide trainee surgeons with realistic experience in both tactile feedbacks and craniocerebral anatomy, improving their surgical skills. ER -